Leveling and angular measurements are vital functions for precision equipment installation, machine setup alignments and metrology in many industries within the precision engineering cluster. Imprecise leveling a machine affects its structural stability thus severely reduces the accuracy, functional and quality performances of a machine/equipment. In fact, precision levelling, angle measurement and alignment tasks essentially involve 2-dimentional planes rather than conventionally known as two independent single-axis orthogonal lines. Dual-axis simultaneous angles display and real-time continuous tracking of tilted-plane angular readings are required to guide field engineers in aligning precision object/machine to a required position accurately and effectively.
Digi-Pas® pioneered world's-first 2-axis MEMS digital leveling instrument, sensor module and inclinometer (US patented) embedded with vibrometer offers superior performance with ability to operate in a very unforgiving/harsh operating environment (e.g. high shock/impact, temperature & water) which empower application engineers/scientists in eradicating constraints previously difficult or unable to do with traditional 'bubble' spirit level or conventional pendulum/servo-based inclinometers.
With reference to user's testimonials, feedbacks, and from interacting with professionals and trade specialists in many countries over the years, countless valuable application information on "where", "how" and "why" Digi-Pas® 2-axis instruments have been used to simplify and speed up leveling/alignment/angle-setting tasks productively, with higher accuracy, improved quality and performance. The following are application samples in various industries for convenient reference. Many of these pictures are obtained resulting from our user's generous courtesy while others are provided for solely illustrative purpose.
Precisely setting up machine guiderails is critical to ensure accuracy and stability performances of precision CNC machines. With Digi-Pas® DWL-8500XY, guiderails straightness and 2D planar flatness of the slide top surface can be precisely determined to achieve accurate alignment during machine assembly.
Granite table with high quality surface flatness specification is a critical asset in precision metrology laboratory and quality assurance department of a precision machining factory. The accuracy of granite table surface flatness profile is crucial for lab inspectors to confidently perform machined part measurement and precision instrument calibration. Using DWL-8500XY ultra precision inclinometer having an accuracy of 5µm/M, granite table surface profile with grade 1/2/3 are able to be tested and verified to rigorously ensure its surface flatness profile conforms to the required specification.
Digi-Pas® DWL-3000XY & DWL-3500XY are used for installation, setup, maintenance of milling & surface grinding CNC machines. It is able to accurately level jig & fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.
Digi-Pas® Precision parts/components machining requires continuous quality assurance monitoring and is particularly important in managing production yield and thus cost. The Digi-Pas® DWL-3500XY with build-in vibrometer and data logging features enable production engineering team to effectively evaluate each CNC machine performance with precise numerical data and vibration graphs.
Digi-Pas® DWL-3000XY 2-Axis model is used during installation & setup of Vision Measurement Equipment for levelling & checking equipment's positional stability to achieve high quality sharp image capturing & measurement.
Digi-Pas® DWL-3500XY 2-Axis Machinist Digital Level is suitable for precision Coordinate Measurement Machine (CMM) installation & setup. The device provide high precision levelling and checking for machine's positional stability to achieve high quality sharp image capturing and measurement.
Digi-Pas® DWL-3500XY 2-Axis Precision Machinist level is used for installation, setup & maintenance of very high precision CNC machines.
Digi-Pas® DWL-3500XY Dual Axis Machinist Digital Level is used for laser beam vector alignment (or misalignment measurement) of LIDAR (Light Detection and Ranging) sensor mechanical reference frame.
Digi-Pas® DWL-3500XY 2-Axis Precision Machinist level is used for installation, setup & maintenance precision measurement instruments in wafer foundry.
Digi-Pas® DWL-3000XY & DWL-3500XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.
Digi-Pas® setup and maintenance of wire bonders in semiconductor backend assembly require high machine positional stability. Precise levelling for wire bonding machine prevents unnecessary structural vibration affecting wire-bond quality and production yield. The DWL-3000XY levelling and vibrometer features serve the above purpose effortlessly.
Digi-Pas® DWL-3500XY 2-Axis Precision Machinist level is used for monitoring a precision wafer manufacturing equipment performance.
Accurately levelling the build platform of 3D printer using Digi-Pas® DWL-3000XY is the most critical step of setting up a 3D printer to produce high quality 3D model. Poor levelling or slight inclination of the platform causes continuous printing layers to be out of alignment, subsequently affecting the detailed features and geometries of a 3D model.
Digi-Pas® repeat experiments and data collection are tedious processes in many research activities. Digi-Pas® DWL-2000XY & DWL-3500XY are used by researchers to align experimental equipment work surfaces, levelling objects and ensuring critical angular position is set. The superb 2-axis accuracy combined with the temperature stabilization feature speed up and improves the reliability of those tasks even in a varying temperature of working environment.
In research laboratory, laser beam setup that involves alignment of multiple optical components is a challenging process. With the assistance of Digi-Pas® DWL-3500XY, tilt angle of mirror and position of lenses is aligned accurately to achieve high precision angular and translational displacement of laser beam.