2-Axis Precision Digital Level

Product overview


Specification


  • Measuring range: 1.0” or 0.00° ~ ±5.00° dual-axis
  • Resolution: 0.002”/ft or 40-second (0.18 mm/M or 0.01°)
  • Accuracy: ±0.004”/ft or 80-second (± 0.02°) from 0° to ±0.5° and 0.04° at other angles
  • User may use device without or with Bluetooth® Measurement when paired with smartphone & Digi-Pas Machinist level App
  • Bluetooth range: approx. 50ft.
  • Operating temperature at 10°F to 120°F. or -10°C to +50°C
  • ACCURACY of Digi-Pas digital level is verified by accredited 3rd Party Calibration & Test Laboratories in USA, Japan and Germany traceable to NIST, JIS & DIN.

Where to buy


DOWNLOAD APPS


Steps to Redeem your 1st FREE "Machinist Level Sync App"


First, please download Machinist Level Sync App from Apple or Google Store into your smartphone or tablet to enable FREE redemption of your app. If you who need more than one app to share a single device among multiple users, additional paid-apps can be purchased from Apple or Google Store.

NEXT, please follow steps below:


Step 1

Tap "Redeem" on top left corner of App.

Step 2

Gently scratch off the label on the back of the App Card accompanied to reveal the hidden 16-digit code.

Step 3

Enter the pop-up menu, 16-digit code, E-mail address & Company name then tap "Redeem" button.

Step 4

"Success Retrieval" is prompted and you can use full features of the App now.

Device Features


  • MODE

    Switch angle display between X & Y Axis

  • ALTERNATE ZERO SETTING

    Enable user to measure relative angles at a common plane with respect to a reference angle. The reference angle can be set using alternate zero feature

  • ABSOLUTE LEVEL SETTING

    Enables user to perform absolute symmetry readings for both "front" & "reverse" (180 degrees) positions of any measurement angle.

  • USER SELF CALIBRATION

    Easy self-calibration feature allows user to reset the digital level back to factory preset accuracy.

  • "Digi-Pas Mechinist Level" APP (SMARTPHONE/TABLET)

    Users may fully utilize Bluetooth mobile features for wireless levelling/alignment activities. One App is FREE to be redeemed for each purchase. Additional PAID Apps can be purchased from Apple and Google Stores. Each App works with the designated smartphone/tablet. Each App can connect with any device DWL1300XY (no restriction).

Mobile App Features


FREE FULL
FEATURES
Calibration
Single Axis
Smart 2D Bubble®
Quick Snap
Multiple Device
FUNCTIONS
Absolute level
Alternate Zero
Units Measurement Change
Full Screen
Hold

Applications


Precision levelling and angle measurement/alignment tasks essentially involve surface planes that demand for 2-dimensional solution rather than the outdated single-axis 'bubble' vial method that indicates 'bubble' leveling status 'one axis at a time'.

Digi-Pas® 2-axis precision digital level simultaneous displays of two-dimensional plane angles, effectively simplifying and resolve the hurdles of taking angles 'one axis at a time' iteration (tedious & time consuming task of trial-and-error) experienced when using those outdated single-axis 'bubble' or traditional digital levels to conduct surface plane levelling, tilt angle measurement, surface flatness profiling and precision 2D alignment tasks.

  • Digi-Pas® DWL-1300XY are used for installation, setup, maintenance of milling & surface grinding CNC machines. It is able to accurately level jig & fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.
  • The simultaneous display for dual-axis feature of Digi-Pas® DWL-1300XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise levelling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.
  • Digi-Pas® DWL-1300XY 2-Axis model is used for Vision Measurement Equipment installation & setup. Levelling & checking equipment's positional Stability for high quality sharp image capturing & measurement.
  • Digi-Pas® DWL-1300XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.
  • Digi-Pas® DWL-1300XY dual axis model is used for monitoring a precision wafer manufacturing equipment's performance.
  • Digi-Pas® DWL-1300XY is used in railway maintenance & operation to detect rail tracks deformation and elevation variations. It is a useful tool in aids for rail lines realignment, repair and construction of a new rail line. Accurate rail tracks longitudinal profile levelling and transversal alignment lead to enhanced safety standard for high speed railway operation.

FAQ


  • Why device screen only shown blinking BT indicator?

    The blinking “BT” indicator means the device is haven’t been initialized. Users need to initialize the leveling instrument using the Digi-Pas® Machinist Level App from Google Play Store or Apple App Store through Bluetooth. The guide on how to pair will show on the Digi-Pas® Machinist Level App.

  • Why device reading is not zero when placing on flat surface?

    This situation happens when the precision level is placed on a rough, dirty or uneven surface. Precision digital levels are very sensitive to surface unevenness where placed. Ensure that the machine contact surfaces are clean and smooth to get consistent readings. Digi-Pas® precision digital level has a smart built-in feature that empower users to perform self-calibration to completely remove any residue offset and set the device to its factory accuracy. See video links on how to perform “User-Self Calibration”.

    Alternatively, users may choose an easy ‘quick solution’ to simply perform the Absolute Level Setting on the surface of the object to be measured to remove any residual offset on each measurement to be taken.

  • Why do I get two different readings when placing the device on front facing, and then replacing it on the reversed facing?

    Your precision digital level may have been subjected to extreme physical or temperature shocks during usage, transportation or storage that affected its accuracy. An offset value of reading may have been present. Digi-Pas® precision digital level has a smart built-in feature that empower users to perform self-calibration to completely remove any residue offset and set the device to its factory accuracy. See video links on how to perform “User-Self Calibration”

    Alternatively, users may choose an easy ‘quick solution’ to simply perform the Absolute Level Setting on the surface of the object to be measured to remove any residual offset on each measurement to be taken.

  • Machinist Level App unable to pair with the device. What should I do?

    The device battery level might be low, please replace new battery.

  • Machinist level app unable to find Digi-Pas Device. What should I do?

    Please ensure Digi-Pas Machinist Level Bluetooth is enable to establish the connection. To enable/disable device bluetooth、 press and hold "Mode" button.